Manufacturer’s End-fire Certification / Recertification Course November 13-17, 2017


ANNOUNCING Manufacturer’s End-fire Certification / Recertification Course

for Maintainers & Installers November 2017

WHEN:          November 13-17, 2017 (Registration deadline is 1 week prior to course start date)

 WHERE:       Watts Antenna Company Manufacturing Facility, 70 North Plains Road – Suite H,

The Plains, Ohio 45780-1156, USA (Located in South-Eastern, Ohio – 85 Miles South-East of the John Glenn Columbus International Airport, USA – CMH)

 COST:            $ 2,000 USD per Individual (due upon registration)

 Make Payment by Check or Credit Card – Master and VISA.

 This five (5) day certification / recertification course for End-fire Glide Slope Antenna Systems leads to our manufacturer’s certification of the individual for installation, optimization and training required to maintain the factory warranty on our products.  Recertification is required for individuals who received their factory certification prior to the year 2015. 

 Go to our web-site for more information on the WATTS Manufacturer’s Certification Recertification programs – http://www.wattsantenna.com – then click the “Manufacturer’s Certification” Link.

 Instructor: Company President, John H. Johnson, Sr., will lead the course.

 Objectives: This course is designed to provide each attendee with a high level of proficiency in the end-fire systems, using Watts’ facilities and equipment for hands-on experience with major system sub-assemblies and to cover the following key areas of interest:

    • System familiarization (antennas and interface unit)/general requirements and specifications
    • Theory of operation; standards and tolerances; periodic/corrective maintenance procedures
    • Special configurations to accommodate complex installation constraints and siting issues
    • Site evaluations – modeling and temporary installations
    • Installation, integration and checkout; troubleshooting; system optimization; antenna

      optimization; and flight inspection.

 Materials:  Each participant will receive both a Model 105 and a Model 106 End Fire Glide Slope Antenna Instruction Book.

Please complete the registration form and contact us at (740) 797-9380 or email bill.johnson@wattsantenna.com if you are interested in attending.

Have any Question or Comment?

Leave a Reply